Maximum Load

Suitable for mounting a satellite dish with a diameter of 100 cm.

Steel L-shaped pipe bracket, ideal for mounting a satellite dish to the wall. Particularly suitable for overcoming roof overhangs or other obstacles.

Two-part wall bracket set for attaching a pole to a wall at a distance of approx. 50-60 cm (depending on the pole diameter).
Thanks to the adjustability, the pole can be aligned vertically despite any wall protrusions.

The logarithmic design guarantees a smooth characteristic curve over the entire VHF range without loss of gain in the lower VHF channels.

Maximum load:

Suitable for mounting a satellite mirror with a diameter of 90 cm.

Balcony stand with 1m pole for "light" 40x40 cm paving slabs

Roof tile mounting set, tile red, variant 1 incl. pole clamp with variable wall spacing

DAB+ / VHF Band III antenna for digital radio reception (175-240 MHz) in metropolitan areas.
This is the DAB antenna model which - in combination with a ring dipole - is also used in our FM-DAB combination antenna (3H-DAB-FM).

Leicht formbarer Blei-Dachziegel (Saturnblei, 1,25 mm stark) in hochwertiger Verarbeitung für Masten bis Ø 60 mm.

Bitte nutzen Sie Blei-Ziegel trotz der geringen Langzeit-Abtragungsraten im Interesse der Umwelt (Belastung des Regenwassers durch Schwermetalle) nur in Ausnahmefällen. Verwenden Sie nach Möglichkeit unsere hochwertigen Alu- und Kunststoff-Dachziegel.

Maximum Load

Suitable for mounting a satellite dish with a diameter of 100 cm.

Mounting is possible above or below the rafters.

This mount is screwed from below to a horizontal roof or the balcony floor. It is suitable for mounting satellite dishes, surveillance cameras, or directional radio antennas.
Professional craftsmanship made in Germany.

The wall bracket was specifically designed for top-pole mounting of Tooway satellite antennas (Internet via SAT). When mounted on the wall, the bracket is characterized by easy and quick installation as well as high stability.

The logarithmic design prevents extreme gain losses in the lower frequency range, as this antenna type is not optimized for a central frequency but resonates with different elements across the entire frequency range.

One of the best rafter brackets on the market. Withstands a load of 1000 Nm, almost twice as much as comparable brackets. Quick installation. Variable rafter spacing (clear width between the rafters) 55 - 120 cm. Height 90 cm, Ø 48 mm with pole cap. Improved design for cable feed-through!

If not in stock, item will be ordered directly from the distributor after receipt of your order. Delivery time approx. 7-10 days.

FM folding dipole with F connection for receiving radio programs.

Powerful directional antenna for VHF BIII / DAB+ long-distance reception.

Please note that the antenna is over two meters long!

An optional 20 dB amplifier module (3H-YAMP-DAB20) is available for this antenna, which can be easily replaced with the passive circuit board in the connection box.

Two-part wall bracket set for attaching a pole to a wall at a distance of approx. 50-60 cm (depending on the pole diameter).
Thanks to the adjustability, the pole can be aligned vertically despite any wall protrusions.

High-quality, strongly adhesive, self-welding sealing tape 600 x 80 mm made of butyl rubber in brick red.

Aluminum roof tile with cable routing available in various colors and sizes: Premium, weather-resistant aluminum roof tiles with cable management for up to 16 cables. Suitable for masts up to Ø 60 mm. Configurable in Black and Brick-red. Simply select your desired size and color.

Zinc Die-Cast Clamp / Grounding Pipe Clamp for galvanized pipes, nominal diameter 48.3 mm

5-element FM Yagi antenna with F-connector for horizontal or vertical outdoor or under-roof installation