We exclusively supply customers with prior business registration
Mounting solutions
Maximum load
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Steel mast segment 1 m Ø48 mm, hot-dip galvanized with anti-twist plug-in device for joining several mast tubes to create high, anti-twist masts while optimizing transport costs at the same time
ATTENTION: This plug-in pole is not compatible with the 1.5 m and 2.0 m plug-in poles
Maximum Load
Suitable for mounting a satellite dish with a diameter of 100 cm.
Maximum load
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Mast tube Ø 50 mm, 150 cm, made of high-quality aluminum in stainless steel look
Steel mast segment 1.5 m Ø48 mm, hot-dip galvanized with an anti-twist plug-in mechanism for joining several mast tubes to construct tall, anti-twist masts while optimizing transportation costs.
The 1.5 m and 2.0 m plug-in masts can be combined.
WARNING! The 1.0 m plug-in mast is NOT compatible with these masts!
Maximum load
Suitable for mounting a satellite mirror with a diameter of 140 cm.
Steel mast segment 1.5 m Ø60 mm, hot-dip galvanized with anti-twist connector for joining several mast tubes to create high, anti-twist masts while optimizing transport costs
Maximum Load
Suitable for mounting a satellite dish with a diameter of 100 cm.
Maximum load
Suitable for mounting a satellite mirror with a diameter of 140 cm.
Maximum load
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Steel mast segment 2 m Ø38 mm, hot-dip galvanized with anti-twist plug-in device for joining several mast tubes to create high, anti-twist masts (3.90 m, 5.80 m ...) while simultaneously optimizing transport costs
Maximum Load
Suitable for mounting a satellite dish with a diameter of 100 cm.
The 1.5 m and 2.0 m plug-in masts can be combined.
WARNING! The 1.0 m plug-in mast is NOT compatible with these masts!
Steel mast segment 2 m Ø48 mm, hot-dip galvanized with anti-twist plug-in mechanism for joining several mast tubes to build tall, anti-twist masts (3.90 m, 5.80 m ...) while optimizing transportation costs
Maximum load
Suitable for mounting a satellite mirror with a diameter of 100 cm.
Maximum load
Suitable for mounting a satellite mirror with a diameter of 140 cm.
Maximum Load
510 NM at a max. mounting height of 1m
170 NM at a max. mounting height of 3m
This rafter holder is also ideally suited for small rafter distances, as the slider is narrow and freely adjustable. Furthermore, the support tube can be easily shortened if needed. ????
Maximum Load
450 Nm in all directions with a max. mounting height of 3m.
Extremely robust surface and patio stand, made of galvanized steel, especially suitable for mounting Micro and Mini wind turbines for at least 4 concrete slabs 50 x 50 cm. The mast can be tilted up to 2°.
20 pieces heavy duty anchor / sleeve anchor metal, Ø 10mm
The large head diameter (Ø 22mm) achieves significantly higher tightening and head pull-through values
UV-stable vulcanizing tape / sealing tape / adhesive tape for sealing cable connections, cable feedthroughs, masts in roof feedthroughs, pipes, and much more.
Maximum Load
Suitable for mounting terrestrial antennas and lightweight WiFi antenna technology.
Not suitable for satellite dishes!
Mast extension 50cm for masts up to Ø 60 mm.
It can also be used as a short mast on a vertical pipe of a railing.
This base is suitable for square plate sizes of 50 x 50 cm. With the included screw set, 4 or 8 pavement plates (one or two layers) can be mounted.
The plates shown in the image are not included in the delivery
This base is suitable for square plate sizes of 50 x 50 cm. With the included set of screws, you can mount 4 or 8 paving slabs (one or two layers).
The concrete slabs shown in the picture are not included in the delivery
Maximum Load
Suitable for mounting terrestrial antennas and lightweight WiFi antenna technology.
Not suitable for satellite dishes!
Mast extension 80cm for masts up to Ø 60 mm
Can also be used as a short mast on a vertical pipe of a railing.
Maximum Load
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Aluminum roof tile with cable routing available in various colors and sizes: Premium, weather-resistant aluminum roof tiles with cable management for up to 16 cables. Suitable for masts up to Ø 60 mm. Configurable in Black and Brick-red. Simply select your desired size and color.
Maximum Load:
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Maximum Load:
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Maximum Load:
Suitable for mounting a satellite mirror with a diameter of 90 cm.
High-Quality Mounting Components
Our range of mounting components is extensive and versatile. From mast accessories and seals to specialized fixation sets – we offer everything you need for a secure and stable installation of your satellite unit or antenna. Feel free to continue browsing our satellite dish mounts.
Flexible Mounting Solutions for Every Need
Whether for roof, wall, balcony, or garden mounting, our mounting solutions are flexible and robust to meet a variety of requirements. Discover our wide range of mounts available in various shapes and sizes.
Rely on Our Expertise
With our many years of experience in satellite technology, we are your reliable partner for B2B mounting solutions. Trust our expertise and benefit from our comprehensive range.