We exclusively supply customers with prior business registration

3 m high Goliat rafter bracket Ø48 mm

SKU: 51525
GTIN: 4050822515257
Category: Dachsparrenhalter
Manufacturers: A.S. SAT Antennenzubehör GmbH

Reviews

Documents

Maximum Load

510 NM at a max. mounting height of 1m
170 NM at a max. mounting height of 3m

In unfavorable locations, signals from DVB-T, DAB(+), FM/UKW, LTE, etc. can often still be received thanks to the 3-meter plug-in mast system (3 x 1 m).
This rafter holder is also ideally suited for small rafter distances, as the slider is narrow and freely adjustable. Furthermore, the support tube can be easily shortened if needed. 📺

247,90 €

excl. 19% VAT , plus (GLS-Paket)

13 pc(s) In stock
Delivery time: 1 - 5 Workdays (DE - int. shipments may differ)

pc(s)

Description
Reviews

This rafter holder also guarantees precise and stable alignment for bidirectional, high-performance internet reception via satellite.

The carrier is screwed tightly to a rafter. The attachment of the other side is freely adjustable until the final screwing. This way, the rafter holder can be flexibly adjusted to the rafter distance.
The bracket of the mast tube is freely adjustable across the entire width between the rafters and can thus be precisely adjusted to the roof penetration using a system tile. The roof pitch is freely adjustable within the specified limits via a special slider mechanism, which is then screwed tight after adjusting the mast.

Technical Data:

High Quality product with patent protection
Galvanized
Rafter distance up to max. 1100 mm, flexibly adjustable
For roof pitches from 25-55° continuously adjustable
Mast tube Ø 48 mm x 3 m;
Mast 3-part, twist-proof, one segment can be omitted for a shorter mast (approx. 2 m)
Bending moment: 1100 Nm (at 3 m height, a wind load of max. 366.6 N is permissible)
Cross-section of the steel carrier: 100 x 30 mm; material thickness 3 mm - extremely torsion-resistant; no wobbling with larger rafter distances
For size comparison - the wood screws shown in Fig. 3 are 120 mm long with a head diameter of approx. 21 mm. A total of 8 of these screws are included in the delivery.
Uncomplicated on-roof installation (only 4 screws) + wood screws
The mast tube is open at the bottom; with a suitable mast cap with cable guide, an entire cable bundle can be routed through the tube under the roof.

An acoustic decoupling from the roof rafter for the installation of mini wind turbines (otherwise the humming of the systems is transmitted to the roof structure) will also be available as an option shortly.

Safety Instructions:

Satellite antennas may only be attached to this system up to a height of 1 meter above the roof.
Approved for satellite dishes up to max. Ø 85 cm
Installation should only be carried out by trained personnel, taking into account wind loads and lightning protection.

PDF | Datasheet