TV / Radio reception

Small 4-element DAB+ / VHF Band III antenna 174-240 MHz for pre-mast mounting (when mounted vertically, the mast does not shadow the elements and the receiving dipole) for reception of DAB+ digital radio.

An optional 20 dB amplifier module is available for this antenna, which can be easily replaced with the passive circuit board in the connection box.

3-element Yagi FM antenna with F-connector for horizontal or vertical outdoor or under-roof mounting

The logarithmic design guarantees a smooth characteristic curve over the entire VHF range without loss of gain in the lower VHF channels.

Extremely robust precision satellite dish made of torsion-free hard aluminum (1.3 mm thick), available in 3 colors. The back section and the braced LNB arm are made of die-cast aluminum.

One of the best pre-set stripping tools for 6 and 7 mm coaxial cables (RG6, RG59) with replaceable blade cartridges. Suitable for RG11 with the optional RC 11-250 cartridge.

The classic antenna socket / IEC socket / coaxial coupling for TV and radio, presented here as a high-quality shielded product from Cabelcon according to Class A specification.
Now also available in a space-saving, 90° angled variant.
Suitable for most RG6 cables with connector codes 4.9 and 5.1

Make your own HDTV-compatible connection cables! Don't trust pre-made cables from questionable sources!

The classic antenna plug / IEC plug for TV and radio here as a high-quality shielded product from Cabelcon to Class A specification.
Now also available as a space-saving, 90° angled version.
Suitable for most RG6 cables with connector codes 4.9 and 5.1

Assemble your HDTV-compatible connection cables yourself! Don't trust prefabricated cables from dubious sources!

For RG11 coaxial cables and generally for cables with an outer diameter of 7.5-10.5 mm.
Caution! This device is designed for cutting professional outdoor cable with a thick, stable cable sheath; positive results with 5-fold shielded 8...8.5 mm cable types are very difficult to achieve with this tool.

Crimping tool for Cabelcon CX3 F-connectors and Cabelcon CX3 IEC connectors for cable sizes up to RG6

Special FM push-on / F-Quick compression plug (is not screwed on, but only plugged on) with a high pull-off torque of at least 3 kp for a tight fit on the F sockets. The plug was developed for use on highly shielded connection cables for cable modems, HD receivers and HF patch cables. The plug is fully functional even when half-connected and still maintains the shielding dimension. In conjunction with the Cabelcon Seal Ring, the connector is waterproof (24 h at 1 m water depth). The NiTin coating guarantees the best corrosion resistance.

Assembly without any special tools - for 7 mm coaxial cable
Clearance sale of stock lots

Successor item
3577 - Cabelcon F-6-TD SELF INSTALL 4.9 NI True Drop

The classic antenna socket / IEC socket / coaxial coupler for TV and radio, here as a high-quality shielded quality product from Cabelcon according to Class A specification.
Suitable for most RG6 cables with connector codes 4.9 and 5.1.

Make your own HDTV-compatible connection cables! Don't trust prefabricated cables from questionable sources!

IEC Connector / Antenna connector with NiTin coating for the best corrosion resistance. Using this connector and the corresponding IEC socket (IECF), you can create a high-quality shielded TV connection cable.

The "little brother" of the All Size Tool
Universal Cabelcon compression tool for all CX3 connectors except RG11, MCX and 90° angle connectors

Replacement attachments for the Cabelcon All Size Tool manufacturer number 98029072-01 or the Kathrein compression pliers ZAW 13.

Installation wrench (also known as "asparagus picker" in trades circles) for working on closely spaced F-connectors.
Suitable for all F-connectors HEX 11 (11 mm nut) including the CX3 compression connectors.