We exclusively supply customers with prior business registration
A.S. SAT Antennenzubehör GmbH
Our Private Label A.S. SAT Solid Mounting Units
A.S. SAT Antenna Accessories GmbH is a renowned manufacturer of mounting solutions for satellite installation. With a broad product range, the company offers high-quality solutions for the installation of satellite antennas. From aluminum roof tiles to satellite masts, and various brackets for satellite mounting, A.S. SAT Antenna Accessories provides a plethora of products that meet the needs of both installers and end-users.
Maximum load
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Maximum load
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Ground mount for a camping antenna mast or use as an umbrella stand on the beach
Steel mast segment 1 m Ø48 mm, hot-dip galvanized with anti-twist plug-in device for joining several mast tubes to create high, anti-twist masts while optimizing transport costs at the same time
ATTENTION: This plug-in pole is not compatible with the 1.5 m and 2.0 m plug-in poles
Maximum Load
Suitable for mounting a satellite dish with a diameter of 100 cm.
Maximum load
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Mast tube Ø 50 mm, 150 cm, made of high-quality aluminum in stainless steel look
Steel mast segment 1.5 m Ø48 mm, hot-dip galvanized with an anti-twist plug-in mechanism for joining several mast tubes to construct tall, anti-twist masts while optimizing transportation costs.
The 1.5 m and 2.0 m plug-in masts can be combined.
WARNING! The 1.0 m plug-in mast is NOT compatible with these masts!
Maximum load
Suitable for mounting a satellite mirror with a diameter of 140 cm.
Steel mast segment 1.5 m Ø60 mm, hot-dip galvanized with anti-twist connector for joining several mast tubes to create high, anti-twist masts while optimizing transport costs
Maximum Load
Suitable for mounting a satellite dish with a diameter of 100 cm.
Maximum load
Suitable for mounting a satellite mirror with a diameter of 140 cm.
Maximum load
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Steel mast segment 2 m Ø38 mm, hot-dip galvanized with anti-twist plug-in device for joining several mast tubes to create high, anti-twist masts (3.90 m, 5.80 m ...) while simultaneously optimizing transport costs
Maximum Load
Suitable for mounting a satellite dish with a diameter of 100 cm.
The 1.5 m and 2.0 m plug-in masts can be combined.
WARNING! The 1.0 m plug-in mast is NOT compatible with these masts!
Steel mast segment 2 m Ø48 mm, hot-dip galvanized with anti-twist plug-in mechanism for joining several mast tubes to build tall, anti-twist masts (3.90 m, 5.80 m ...) while optimizing transportation costs
Maximum load
Suitable for mounting a satellite mirror with a diameter of 100 cm.
Maximum load
Suitable for mounting a satellite mirror with a diameter of 140 cm.
Einfache Montage, hohe Kompatibilität und robustes Design für langanhaltende Qualität.
Maximum Load
510 NM at a max. mounting height of 1m
170 NM at a max. mounting height of 3m
This rafter holder is also ideally suited for small rafter distances, as the slider is narrow and freely adjustable. Furthermore, the support tube can be easily shortened if needed. ????
By omitting an LNB holder, a Technisat or Kathrein LNB adapter can be extended by two LNBs.
Maximum Load
450 Nm in all directions with a max. mounting height of 3m.
Extremely robust surface and patio stand, made of galvanized steel, especially suitable for mounting Micro and Mini wind turbines for at least 4 concrete slabs 50 x 50 cm. The mast can be tilted up to 2°.
The large head diameter (Ø 22mm) achieves significantly higher tightening and head pull-through values
Maximum Load
Suitable for mounting terrestrial antennas and lightweight WiFi antenna technology.
Not suitable for satellite dishes!
Mast extension 50cm for masts up to Ø 60 mm.
It can also be used as a short mast on a vertical pipe of a railing.
Maximum Load
Suitable for mounting terrestrial antennas and lightweight WiFi antenna technology.
Not suitable for satellite dishes!
Mast extension 80cm for masts up to Ø 60 mm
Can also be used as a short mast on a vertical pipe of a railing.
Maximum Load
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Aluminum roof tile with cable routing available in various colors and sizes: Premium, weather-resistant aluminum roof tiles with cable management for up to 16 cables. Suitable for masts up to Ø 60 mm. Configurable in Black and Brick-red. Simply select your desired size and color.
Maximum Load:
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Maximum Load:
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Maximum Load:
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Maximum Load
Suitable for mounting a satellite mirror with a diameter of 90 cm.
The sealing set in brick red allows for the watertight roof passage of masts or roof rafter holders. Thanks to the special mast cap, the antenna cables can be routed over the mast tip into the interior of the house.
Aluminum roof tiles in various colors and sizes: High-quality, weatherproof aluminum roof tiles, suitable for poles up to Ø 60 mm and suitable for roof pitches up to 56°. Available in red and black.
Maximum load:
Suitable for satellite mirrors with a diameter of 80 cm
Maximum load:
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Maximum load:
Suitable for mounting a satellite mirror with a diameter of 90 cm.
Stand with 60 cm mast made of high-quality aluminum. Thanks to its salt water resistance, it is suitable for use in coastal regions. The stability of the support tube is ensured by a reinforcing collar on the base plate
Maximum Load:
Suitable for mounting a satellite dish with a diameter of 90 cm.
Maximum load:
Suitable for satellite dishes with a diameter of 80 cm. & an additional terrestrial antenna.
Maximum load:
Suitable for satellite dishes with a diameter of 80 cm. & an additional terrestrial antenna.
Steel mast foot; with stable toothed prism clamping piece / toothed clamp for twist-proof fixation of a mast tube to the ground
Sturdy, hot-dip galvanized pipe clamp for boom poles up to Ø 60 mm with robust tooth clamps.
Applications: Satellite and antenna installation, as well as outdoor events & stage construction
Anti-twist mast mounting set with simple mast clamp and red rubber grommet to seal the mast entry.