We exclusively supply customers with prior business registration

Quick-Mount package 6.0 (RG59) with professional stripping tool, 20 F-59-TD QM 6.0 connectors and compression pliers

SKU: 2890
GTIN: 4260310273297
Category: TV / Radio reception
Manufacturers: A.S. SAT Antennenzubehör GmbH

incl. Pocket Tool crimping tool, adjustable professional stripping tool and 20 Cabelcon F-59-TD QM 6.0 Quick Mount compression connectors.

31,05 €

excl. 19% VAT , plus (Paket)

2 Set(s) In stock
Delivery time: 1 - 5 Workdays (DE - int. shipments may differ)

Set(s)

Description
Reviews

Contents:

20 connectors F-59-TD QM 6.0 Quick Mount for 6 mm coax cable. (RG59)
1 Crimping tool for Cabelcon F and IEC connectors for cable thicknesses up to and including RG6
1 Adjustable professional stripping tool for RG59/RG6 (3H-CCS-302)

Cabelcon compression connector:

waterproof (tested for 8 h in 30 m water depth), therefore ideal for connection to LNB and outdoor antennas
for coax cable 6 mm
NiTin coating provides excellent protection against environmental influences

When using these connectors outdoors, you do not need any additional seals on the cable or connector. The connection is absolutely watertight if the plug is processed correctly. In contrast to conventional compression plugs, the braiding must not be folded back with the Quick-Mount system.

The 6.0 dimension is suitable for most RG59 cables with an outer diameter of 5.0 - 6.7 mm. The connector clamps onto the cable from the outside; it is no longer necessary to "choke" a tube between the first foil and the braid.

CX3 Pocket Tool crimping tool RG 59/6 F+IEC from Cabelcon

Cabelcon F and IEC connectors for cable thicknesses up to and including RG6 (also suitable for Kathrein EMK 12).

1 Adjustable professional stripping tool for RG59/RG6 (3H-CCS-302)

Handy and convenient cable stripper
Supported cable types:RG59, RG6
2 blades for simultaneous stripping of the outer conductor and the inner conductor in one operation _
Both blades can be precisely adjusted to different cable types using the key supplied with the tool (practical tip: adjusting the cutting depth:Only ever adjust the blades with the wrench by 1/4 turn and then test)
Blade distance preset to 6.5 mm - ideal for crimp and compression connectors

Setting the tool:

The tool is preset for 6.8 mm cables. For thinner cables, the yellow cable guide must be pressed out using the hexagonal wrench attached to the tool and reinserted, rotated accordingly.

Test stripping: To do this, hold the tool in your hand with the set screws facing downwards, open the cable guide and insert the coaxial cable into the V-shaped cable guide from the left. Then rotate the tool 4-5 times around the cable. Then open the cable guide, remove the cable and remove any insulation residue. The blade for the inner conductor must not damage it, the blade for the sheath must not cut the braiding of the cable. If a blade does not cut deep enough or cuts too deep, adjust as follows using a hexagonal wrench:
--> Turn clockwise: blade cuts deeper into the cable.
<-- Turn counterclockwise: blade cuts less deeply.
Only ever work with ¼ turn, otherwise you will quickly lose track!

If this does happen and you no longer know where you actually are, e.g. because the inner conductor is cut or similar, simply unscrew the blades with several counter-clockwise turns and slowly feel your way forward again.