Cabelcon

Successor to the Cabelcon F-56-CX3 4.9 (HAN: 99909441-01)

For 7 mm coaxial cable with dielectric Ø 4.6 mm, waterproof, NiTin coating for best corrosion resistance

Successor of the Cabelcon F-56-CX3 7.0 QM Short - without O-Ring (HAN: 99909428-01)

Due to its shorter length (about 5 mm shorter than the standard Cabelcon compression connectors), it is ideal for connections with limited space, for example for the wiring of Kathrein UAS-LNBs. WARNING! This connector is NOT waterproof and requires special crimping tools for Cabelcon Short connectors! ... see detailed description

Interesting for installers: The lengthy search for a suitable connector for unknown cables is eliminated. The elimination of the inner tube makes the F-connector relatively independent of the diameter of the dielectric. It can therefore be used in principle for all RG6-cables with an outer diameter of 6.4 - 7.5 mm.

The Cabelcon Hardline Connector Stripping Tool / Prepping Tool for RG11, RG8, and RG213 coaxial cables, as well as general cables with an outer diameter of 7.5-10.5 mm (e.g., some ikx and 1.7/7.0 cables).
Warning! Due to the wider blade spacing, this tool is NOT!!! suitable for RG11 CX3 compression connectors.

This high-quality, angled F-connector for indoor use allows easy installation even on the toughest PE or FRNC cables.
CAUTION! This connector can only be securely crimped with a few compression tools (see product description).

Special F-Push-On/ F-Quick-Self-Install compression plug (is not screwed, but only plugged on) with a tight fit on the F sockets. The plug corresponds to class A++
Suitable for most RG6 cables with connector codes 4.9 and 5.1. No special tools are required for installation.

BNCM Crimp Knob - Installation Tool for BNC Connectors

High-quality Adapter F-connector to Antenna Socket

High-quality F plug to antenna socket / radio adapter

Simple but sturdy Cabelcon F-angle adapter F plug to F socket made of die-cast with soldered inner conductor for use on SAT and multimedia sockets

Original Cabelcon jumper cable / patch cable FM - FM (F-connector to F-connector) for indoor and outdoor use, waterproof, for installation in antenna systems.
UV-stable, various lengths.

Article will be ordered from the distributor immediately after receipt of order if not in stock in the desired quantity (additional delivery time: max. 3 working days)

Special FM push-on / F-Quick compression plug (is not screwed on, but only plugged on) with a high pull-off torque of at least 3 kp for a tight fit on the F sockets. The plug was developed for use on highly shielded connection cables for cable modems, HD receivers and HF patch cables. The plug is fully functional even when half-connected and still maintains the shielding dimension. In conjunction with the Cabelcon Seal Ring, the connector is waterproof (24 h at 1 m water depth). The NiTin coating guarantees the best corrosion resistance.

Special FM push-on / F-Quick compression plug (is not screwed on, but only plugged on) with a high pull-off torque of at least 3 kp for a tight fit on the F sockets. The plug was developed for use on highly shielded connection cables for cable modems, HD receivers and HF patch cables. The plug is fully functional even when half-connected and still maintains the shielding dimension. In conjunction with the Cabelcon Seal Ring, the connector is waterproof (24 h at 1 m water depth). The NiTin coating guarantees the best corrosion resistance.

Preise werden nur freigeschalteten Gewerbekunden angezeigt. Verkauft wird der Artikel AUSSCHLIESSLICH an Fachhandwerker / Installateure mit entsprechender Gewerbeanmeldung.

Nehmen Sie hierzu bitte Kontakt auf!

Preise werden nur freigeschalteten Gewerbekunden angezeigt. Verkauft wird der Artikel AUSSCHLIESSLICH an Fachhandwerker / Installateure mit entsprechender Gewerbeanmeldung.

Nehmen Sie hierzu bitte Kontakt auf!

The classic antenna socket / IEC socket / coaxial coupling for TV and radio, presented here as a high-quality shielded product from Cabelcon according to Class A specification.
Now also available in a space-saving, 90° angled variant.
Suitable for most RG6 cables with connector codes 4.9 and 5.1

Make your own HDTV-compatible connection cables! Don't trust pre-made cables from questionable sources!

The classic antenna plug / IEC plug for TV and radio here as a high-quality shielded product from Cabelcon to Class A specification.
Now also available as a space-saving, 90° angled version.
Suitable for most RG6 cables with connector codes 4.9 and 5.1

Assemble your HDTV-compatible connection cables yourself! Don't trust prefabricated cables from dubious sources!

BNC compression connector for 7 mm coaxial cable with a dielectric up to approx. 4.7 mm

BNC compression connector for 7 mm coaxial cable with a 4.7 - 5 mm dielectric

Successor to the Cabelcon F-56-CX3 7.0 Quick-Mount (HAN: 99909407-02)
This waterproof F-connector allows easy installation even on the toughest PE or FRNC cables.
The tedious search for a suitable connector for unknown cables is no longer necessary, as this F connector can be used for almost all RG6 cables with an outer diameter of 6.4 - 7.5 mm.

Hochwertiger F-Abschlusswiderstand 0,3 - 3000 MHz mit NiTin-Beschichtung.

The classic antenna socket / IEC socket / coaxial coupler for TV and radio, here as a high-quality shielded quality product from Cabelcon according to Class A specification.
Suitable for most RG6 cables with connector codes 4.9 and 5.1.

Make your own HDTV-compatible connection cables! Don't trust prefabricated cables from questionable sources!

Replacement attachments for the Cabelcon All Size Tool manufacturer number 98029072-01 or the Kathrein compression pliers ZAW 13.

The "little brother" of the All Size Tool
Universal Cabelcon compression tool for all CX3 connectors except RG11, MCX and 90° angle connectors

IEC Connector / Antenna connector with NiTin coating for the best corrosion resistance. Using this connector and the corresponding IEC socket (IECF), you can create a high-quality shielded TV connection cable.

IEC connector / antenna connector with NiTin coating for the best corrosion resistance. With this connector and the corresponding IEC socket (IECF), you can create a high-quality shielded TV connection cable.

Single grounding block with 1x Cabelcon F-81-HQ F-female connector.
Unlike grounding blocks made of die-cast, here high-quality Cabelcon F-female connectors have been pressed into a frame.

Double grounding block with 2x Cabelcon F-81-HQ F-female connectors.
In contrast to grounding blocks made from die-cast, this product features high-quality Cabelcon F-female connectors that have been pressed into a frame.

This ring prevents moisture penetration through the thread of the F-socket and the nut of an F-connector.
For 100% protection against moisture ingress, the F-connector must have an O-ring or a seal between the nut and the body, as well as in the cable intake.

For waterproof Cabelcon CX3 connectors, the Seal Ring is redundant, as these connectors are already 100% waterproof according to IPX8 when properly installed.

For F-connectors with PIN Ø 0.4-1.2 mm

Tool for easier sliding on of F-connectors (CX3 and Crimp) onto coaxial cables.
WARNING! Not suitable for Cabelcon Self Install and UE connectors.

Tool for holding the cable while attaching a crimp or compression connector

F connector / compression connector with NiTin coating for best corrosion protection - with O-rings (sealing rings) on the cable side.
Installation without any special tools - for RG6 coaxial cables (Ø 7 mm) with a dielectric Ø 4.6 mm
(most RG6 cables with 1.0 mm inner conductor)
Connector based on the new Cabelcon "True Drop" technology

F connector / compression connector with NiTin coating for best corrosion protection - with O-rings (sealing rings) on the cable side.
Installation without any special tools - for RG6 coaxial cables (Ø 7 mm) with a dielectric Ø 4.8 mm
(most RG6 cables with 1.1 mm inner conductor)
Connector based on the new Cabelcon "True Drop" technology

Assembly without any special tools - for 7 mm coaxial cable
Clearance sale of stock lots

Successor item
3577 - Cabelcon F-6-TD SELF INSTALL 4.9 NI True Drop

Crimping tool for Cabelcon CX3 F-connectors and Cabelcon CX3 IEC connectors for cable sizes up to RG6

For RG11 coaxial cables and generally for cables with an outer diameter of 7.5-10.5 mm.
Caution! This device is designed for cutting professional outdoor cable with a thick, stable cable sheath; positive results with 5-fold shielded 8...8.5 mm cable types are very difficult to achieve with this tool.