Antenna Sockets

Types of Antenna Sockets:
  • Terrestrial Sockets: Used for antenna reception or cable television. They typically have two connections: Radio (FM) and TV.
  • SAT Sockets: With one or two additional SAT connections.
  • Multimedia Sockets: With one or two additional connections for a cable modem or router.
  • Multimedia-SAT Sockets: With two additional connections - 1x Multimedia and 1x SAT.

The types of antenna sockets are further divided into single sockets, pass-through sockets, and end sockets.

  • Single Sockets: Individual sockets that should not be combined with other sockets in a cable run.
  • Pass-through Sockets: Can be daisy-chained in a cable run. The last socket in a run must be an end socket or equipped with a 75 Ohm terminating resistor (for SAT, a DC-decoupled type is essential). They compensate for signal attenuation through the sockets and cable length. Sockets closer to the signal source have higher attenuation, while the last sockets in the chain have the lowest.
  • End Sockets: Always terminated with 75 Ohm - that is, they are factory-equipped with a terminating resistor. Any pass-through socket can be converted into an end socket. An end socket is always the last socket in the run behind one or more pass-through sockets.

SKU:
2902
Manufacturer:
Shipping weight:
0,15 kg
Item weight:
0,15 kg
5,63 € *
Currently out of stock
SKU:
2867
GTIN:
4021121141973
Manufacturer:
Shipping weight:
0,15 kg
Item weight:
0,15 kg
7,97 € *
Currently out of stock

Stichleitungsdose 2 dB für TV, Radio und terrestrischen Empfang. Für Kabel-TV geeignet.

SKU:
96004
GTIN:
4012386036586
Manufacturer:
Shipping weight:
0,15 kg
Item weight:
0,15 kg
3,99 € *
Available immediately
Delivery time: 1 - 5 Workdays
1-Loch TV-Breitbanddose (1x IEC-Stecker OHNE Radio-Anschluss) 5-2000 MHz - intermodulationsfest, inkl. Deckel SAD 03

ACHTUNG - kein DC-Durchlass, NICHT für SAT-Anlagen geeignet.
SKU:
3243
GTIN:
4052387105515
Manufacturer:
Shipping weight:
0,14 kg
Item weight:
0,14 kg
4,16 € *
Available immediately
Delivery time: 1 - 5 Workdays
Multimedia Breitbanddose 5-2000 MHz mit 2 IEC-Anschlüssen (IEC-Stecker und IEC-Buchse) ohne Abdeckung.
Die Dose entspricht einem 2-fach BK-Verteiler im Gehäuse einer Antennendose mit IEC-Ausgängen; beide Ausgänge müssen daher belegt bzw. mit einem Abschlusswiderstand verschlossen sein. 

ACHTUNG - kein DC-Durchlass, NICHT für SAT-Anlagen geeignet.
SKU:
3281
GTIN:
4052387105324
Manufacturer:
Shipping weight:
0,15 kg
Item weight:
0,14 kg
5,84 € *
Available immediately
Delivery time: 1 - 5 Workdays
2-Loch Multimedia Breitbanddose (OHNE TV- und Radio-Anschluss) 5-2000 MHz. Sie ist von der Funktion her nichts weiter als ein 2-fach BK-Verteiler im Gehäuse einer Antennendose; beide Ausgänge müssen daher belegt bzw. mit einem Abschlusswiderstand verschlossen sein. 
SKU:
3205
GTIN:
4052387105546
Manufacturer:
Shipping weight:
0,14 kg
Item weight:
0,14 kg
5,84 € *
Available immediately
Delivery time: 1 - 5 Workdays
2-Loch Multimedia Breitband Durchgangsdose (OHNE TV- und Radio-Anschluss) 5-2000 MHz
SKU:
3209
GTIN:
4052387105362
Manufacturer:
Shipping weight:
0,14 kg
Item weight:
0,14 kg
8,32 € *
Available immediately
Delivery time: 1 - 5 Workdays

Types of Antenna Sockets:
  • Terrestrial Sockets: Used for antenna reception or cable television. They typically have two connections: Radio (FM) and TV.
  • SAT Sockets: With one or two additional SAT connections.
  • Multimedia Sockets: With one or two additional connections for a cable modem or router.
  • Multimedia-SAT Sockets: With two additional connections - 1x Multimedia and 1x SAT.

The types of antenna sockets are further divided into single sockets, pass-through sockets, and end sockets.

  • Single Sockets: Individual sockets that should not be combined with other sockets in a cable run.
  • Pass-through Sockets: Can be daisy-chained in a cable run. The last socket in a run must be an end socket or equipped with a 75 Ohm terminating resistor (for SAT, a DC-decoupled type is essential). They compensate for signal attenuation through the sockets and cable length. Sockets closer to the signal source have higher attenuation, while the last sockets in the chain have the lowest.
  • End Sockets: Always terminated with 75 Ohm - that is, they are factory-equipped with a terminating resistor. Any pass-through socket can be converted into an end socket. An end socket is always the last socket in the run behind one or more pass-through sockets.