Assembly without any special tools - for 7 mm coaxial cable
Clearance sale of stock lots

Successor item
3577 - Cabelcon F-6-TD SELF INSTALL 4.9 NI True Drop

IEC connector / antenna connector with NiTin coating for the best corrosion resistance. With this connector and the corresponding IEC socket (IECF), you can create a high-quality shielded TV connection cable.

Successor to the Cabelcon F-56-CX3 4.9 (HAN: 99909441-01)

For 7 mm coaxial cable with dielectric Ø 4.6 mm, waterproof, NiTin coating for best corrosion resistance

Successor to the Cabelcon F-56-CX3 5.1 (HAN: 99909446-01)

Waterproof compression connector for 7 mm coaxial cable with dielectric Ø 4.8 mm; NiTin coating for best corrosion resistance

For F-connectors with PIN Ø 0.4-1.2 mm

The "little brother" of the All Size Tool
Universal Cabelcon compression tool for all CX3 connectors except RG11, MCX and 90° angle connectors

Successor of the Cabelcon F-56-CX3 7.0 QM Short - without O-Ring (HAN: 99909428-01)

Due to its shorter length (about 5 mm shorter than the standard Cabelcon compression connectors), it is ideal for connections with limited space, for example for the wiring of Kathrein UAS-LNBs. WARNING! This connector is NOT waterproof and requires special crimping tools for Cabelcon Short connectors! ... see detailed description

Interesting for installers: The lengthy search for a suitable connector for unknown cables is eliminated. The elimination of the inner tube makes the F-connector relatively independent of the diameter of the dielectric. It can therefore be used in principle for all RG6-cables with an outer diameter of 6.4 - 7.5 mm.

Replacement attachments for the Cabelcon All Size Tool manufacturer number 98029072-01 or the Kathrein compression pliers ZAW 13.

Original Cabelcon jumper cable / patch cable FM - FM (F-connector to F-connector) for indoor and outdoor use, waterproof, for installation in antenna systems.
UV-stable, various lengths.

Article will be ordered from the distributor immediately after receipt of order if not in stock in the desired quantity (additional delivery time: max. 3 working days)

This ring prevents moisture penetration through the thread of the F-socket and the nut of an F-connector.
For 100% protection against moisture ingress, the F-connector must have an O-ring or a seal between the nut and the body, as well as in the cable intake.

For waterproof Cabelcon CX3 connectors, the Seal Ring is redundant, as these connectors are already 100% waterproof according to IPX8 when properly installed.

The classic antenna socket / IEC socket / coaxial coupler for TV and radio, here as a high-quality shielded quality product from Cabelcon according to Class A specification.
Suitable for most RG6 cables with connector codes 4.9 and 5.1.

Make your own HDTV-compatible connection cables! Don't trust prefabricated cables from questionable sources!

Crimping tool for Cabelcon CX3 F-connectors and Cabelcon CX3 IEC connectors for cable sizes up to RG6

BNC compression connector for 7 mm coaxial cable with a 4.7 - 5 mm dielectric

One of the best F-angle adapters in the world. Outstanding workmanship; the continuous inner conductor ensures excellent electrical properties.

The classic antenna plug / IEC plug for TV and radio here as a high-quality shielded product from Cabelcon to Class A specification.
Now also available as a space-saving, 90° angled version.
Suitable for most RG6 cables with connector codes 4.9 and 5.1

Assemble your HDTV-compatible connection cables yourself! Don't trust prefabricated cables from dubious sources!

The classic antenna socket / IEC socket / coaxial coupling for TV and radio, presented here as a high-quality shielded product from Cabelcon according to Class A specification.
Now also available in a space-saving, 90° angled variant.
Suitable for most RG6 cables with connector codes 4.9 and 5.1

Make your own HDTV-compatible connection cables! Don't trust pre-made cables from questionable sources!

This high-quality, angled F-connector for indoor use allows easy installation even on the toughest PE or FRNC cables.
CAUTION! This connector can only be securely crimped with a few compression tools (see product description).

For coaxial cables Ø 2-7.5 mm (Mini, RG58, RG59, and RG6)
This stripping tool differs from the almost identically looking cheap stripping tools by having a better blade and a stronger, better-tuned spring.

Special FM push-on / F-Quick compression plug (is not screwed on, but only plugged on) with a high pull-off torque of at least 3 kp for a tight fit on the F sockets. The plug was developed for use on highly shielded connection cables for cable modems, HD receivers and HF patch cables. The plug is fully functional even when half-connected and still maintains the shielding dimension. In conjunction with the Cabelcon Seal Ring, the connector is waterproof (24 h at 1 m water depth). The NiTin coating guarantees the best corrosion resistance.

Simple but sturdy Cabelcon F-angle adapter F plug to F socket made of die-cast with soldered inner conductor for use on SAT and multimedia sockets

Special F-Push-On/ F-Quick-Self-Install compression plug (is not screwed, but only plugged on) with a tight fit on the F sockets. The plug corresponds to class A++
Suitable for most RG6 cables with connector codes 4.9 and 5.1. No special tools are required for installation.

Special FM push-on / F-Quick compression plug (is not screwed on, but only plugged on) with a high pull-off torque of at least 3 kp for a tight fit on the F sockets. The plug was developed for use on highly shielded connection cables for cable modems, HD receivers and HF patch cables. The plug is fully functional even when half-connected and still maintains the shielding dimension. In conjunction with the Cabelcon Seal Ring, the connector is waterproof (24 h at 1 m water depth). The NiTin coating guarantees the best corrosion resistance.

The Cabelcon Hardline Connector Stripping Tool / Prepping Tool for RG11, RG8, and RG213 coaxial cables, as well as general cables with an outer diameter of 7.5-10.5 mm (e.g., some ikx and 1.7/7.0 cables).
Warning! Due to the wider blade spacing, this tool is NOT!!! suitable for RG11 CX3 compression connectors.

High-quality F plug to antenna socket / radio adapter

F connector / compression connector with NiTin coating for best corrosion protection - with O-rings (sealing rings) on the cable side.
Installation without any special tools - for RG6 coaxial cables (Ø 7 mm) with a dielectric Ø 4.8 mm
(most RG6 cables with 1.1 mm inner conductor)
Connector based on the new Cabelcon "True Drop" technology

For RG11 coaxial cables and generally for cables with an outer diameter of 7.5-10.5 mm.
Caution! This device is designed for cutting professional outdoor cable with a thick, stable cable sheath; positive results with 5-fold shielded 8...8.5 mm cable types are very difficult to achieve with this tool.

IEC Connector / Antenna connector with NiTin coating for the best corrosion resistance. Using this connector and the corresponding IEC socket (IECF), you can create a high-quality shielded TV connection cable.

High-quality Adapter F-connector to Antenna Socket

F connector / compression connector with NiTin coating for best corrosion protection - with O-rings (sealing rings) on the cable side.
Installation without any special tools - for RG6 coaxial cables (Ø 7 mm) with a dielectric Ø 4.6 mm
(most RG6 cables with 1.0 mm inner conductor)
Connector based on the new Cabelcon "True Drop" technology

Das Cabelcon Pocket Abisoliergerät RG6/59 mit F-Schlüssel HEX 11 ist eine effiziente, benutzerfreundliche und zuverlässige Lösung für jeden, der regelmäßig mit Koaxialkabeln und F-Steckern arbeitet. Seine Vielseitigkeit, einfache Handhabung und die Kombination von zwei wichtigen Funktionen in einem kompakten Design machen es zum idealen Werkzeug sowohl für Profis als auch für Heimwerker.

Successor to the Cabelcon F-56-CX3 7.0 Quick-Mount (HAN: 99909407-02)
This waterproof F-connector allows easy installation even on the toughest PE or FRNC cables.
The tedious search for a suitable connector for unknown cables is no longer necessary, as this F connector can be used for almost all RG6 cables with an outer diameter of 6.4 - 7.5 mm.

BNC compression connector for 7 mm coaxial cable with a dielectric up to approx. 4.7 mm

Ground angle / grounding block made of galvanized steel with 6 original Cabelcon F-81-HQ F-female connectors

For connecting a radio or television set or receiver with IEC connection (aerial socket or aerial plug) to an aerial socket.

For connecting a radio or television set or receiver with IEC connection (aerial socket or aerial plug) to an aerial socket.

incl. Pocket Tool crimping tool, coax professional stripper - Rotary Stripper RG 6/59 and 20 connectors F-6-TD QM 7.0 Quick Mount