Tools

Crimping tool for Cabelcon CX3 F-connectors and Cabelcon CX3 IEC connectors for cable sizes up to RG6

Installation wrench (also known as "asparagus picker" in trades circles) for working on closely spaced F-connectors.
Suitable for all F-connectors HEX 11 (11 mm nut) including the CX3 compression connectors.

One of the best pre-set stripping tools for 6 and 7 mm coaxial cables (RG6, RG59) with replaceable blade cartridges. Also suitable for corresponding mini-cables when using one of the optional RC MINI-250 cartridges.

Das Cabelcon Pocket Abisoliergerät RG6/59 mit F-Schlüssel HEX 11 ist eine effiziente, benutzerfreundliche und zuverlässige Lösung für jeden, der regelmäßig mit Koaxialkabeln und F-Steckern arbeitet. Seine Vielseitigkeit, einfache Handhabung und die Kombination von zwei wichtigen Funktionen in einem kompakten Design machen es zum idealen Werkzeug sowohl für Profis als auch für Heimwerker.

Torque wrench for F-connectors with the torque of 3.4 Nm recommended by most manufacturers.
Here's the variant with an additional mounting aid for F-connectors (the mounting aid is not suitable for Cabelcon Self Install connectors).

For coaxial cables Ø 2-7.5 mm (Mini, RG58, RG59, and RG6)
This stripping tool differs from the almost identically looking cheap stripping tools by having a better blade and a stronger, better-tuned spring.

The "little brother" of the All Size Tool
Universal Cabelcon compression tool for all CX3 connectors except RG11, MCX and 90° angle connectors

Stripper designed for use with extremely short cable ends or special sizes such as those on antenna sockets. (Color may vary depending on the batch.)

One of the best pre-set stripping tools for 6 and 7 mm coaxial cables (RG6, RG59) with replaceable blade cartridges. Suitable for RG11 with the optional RC 11-250 cartridge.

For RG11 coaxial cables and generally for cables with an outer diameter of 7.5-10.5 mm.
Caution! This device is designed for cutting professional outdoor cable with a thick, stable cable sheath; positive results with 5-fold shielded 8...8.5 mm cable types are very difficult to achieve with this tool.

The Cabelcon Hardline Connector Stripping Tool / Prepping Tool for RG11, RG8, and RG213 coaxial cables, as well as general cables with an outer diameter of 7.5-10.5 mm (e.g., some ikx and 1.7/7.0 cables).
Warning! Due to the wider blade spacing, this tool is NOT!!! suitable for RG11 CX3 compression connectors.

Replacement attachments for the Cabelcon All Size Tool manufacturer number 98029072-01 or the Kathrein compression pliers ZAW 13.

Good quality does not have to be expensive. Freely adjustable stripping tool for coax cables Ø 5.5 - 7.5 mm (RG59 and RG6);
factory preset for most 6.8 mm cables.

for 6 and 7 mm coaxial cable ( RG6, RG 59)

BNCM Crimp Knob - Installation Tool for BNC Connectors

Tool for easier sliding on of F-connectors (CX3 and Crimp) onto coaxial cables.
WARNING! Not suitable for Cabelcon Self Install and UE connectors.

incl. Pocket Tool crimping tool, adjustable professional stripping tool and 20 Cabelcon F-59-TD QM 6.0 Quick Mount compression connectors.

incl. Pocket Tool crimping tool, coax professional stripper - Rotary Stripper RG 6/59 and 20 connectors F-6-TD QM 7.0 Quick Mount

Cable shears for underground cables up to 25.4 mm diameter. Cuts cables with ALU and copper cores.
Attention: only suitable for copper and aluminum cables! Cables with Staku (steel-copper or CCS) inner conductors destroy the cutting edges!

Tool for holding the cable while attaching a crimp or compression connector

Self-Install package for almost all professional RG6 cables (Ø approx. 7 mm) including connectors and adjustable stripping tool.

Self-Install package for almost all professional RG6 cables (Ø approx. 7 mm) including connectors and adjustable stripping tool.

Self-Install package for almost all professional RG6 cables (Ø approx. 7 mm) including connectors and adjustable stripping tool.